Top 9 Vacuum Solder Removal

Feature

• Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck
• Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
• Very sturdy,will worke good to remove existing solder from a circuit board
• Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering
• A must have excellent solder sucker which fits nicely in your tool box

Feature

• Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
• Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
• Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
• Compact and Lightweight. Measuring 7.48”X0.79”, the desoldering pump can be used with only one hand, either your right or left hand.
• Solid Construction. The solder sucker has plastic backing to ensure stability.

Feature

• High efficiency solder sucker – the desoldering pump designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
• Desoldering braid wick with rosin – 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size
• geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
• High quality material – the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
• Wide application – correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
• 7-in-1 solder removal tool – 1pcs solder sucker and 6pcs solder wicks in 3 size

Feature

• 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
• 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
• 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
• 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
• 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.

Feature

• 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
• 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
• 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
• 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
• 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.

Feature

• 3 pcs solder suckers: 2pcs solder sucker desoldering pump are in blue color, 1pcs vacuum solder sucker is in golden color.
• The body frame of the desoldering solder sucker is aluminum, the buttons and head of the desoldering pump is made of hard plastic.
• This solder sucker tool is one-handed use designed: it can be handled easily with one hand, whatever left or right hand, just hold the desolder pump and only use your thumb to set position and trigger to operate.
• This solder remover has the powerful suction, the high pressure vacuum can remove solder from a printed circuit board effectively.
• This solder removal tool is lightweight and compact. Weight: 29g/1.02oz
• Size(Length*Diameter):7.32Inch/18.6CM*0.75Inch/1.9CM

Feature

• GENERAL USAGE: Bastex Solder sucker is a long aluminum plunger that allows you to suck the access melted solder away from the circuit board by creating strong suction to help clean spare solder on the pin. Especially helps in small, hard to reach areas. Best for through-hole connections. The Soldering wick braid helps clean spare solder on the pin away to prevent short circuits.
• PRODUCT FEATURES: Easy to use. Solder sucker features powerful, spring-loaded vacuum plunger for complete solder removal. Can be used by either the left or right hand giving you versatility for any soldering job. Soldering braid includes one and a half meters of length to absorb during your soldering jobs.
• DURABILITY: The Solder vacuum is a solid construction with a plastic backing to ensure stability.. Soldering wick is made from pure oxygen free copper wire, no clean flux.
• CONTENTS: One- solder sucker vacuum One-soldering wick braid Width 2.5 mm Length 1.5 mm
• WARRANTY: This product carries a 30-day money back warranty and a 12-month replacement warranty. Satisfaction guaranteed.

Feature

Feature

• Efficient solder sucker: the desoldering pump is designed with double ring and “vacuum” open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
• Quality material : the desoldering pump body is made of quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
• Solder sucker: 2 pieces solder braid wicks, 2.0 mm/ 0.08 inch in width, 1.5 m/ 4.9 feet in length, geometrically-precise weave, can be applied to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
• Solder removal tool: 2 pieces desoldering vacuum pumps and 2 pieces solder wicks, practical tools, the desoldering wick absorbs solder, the desoldering pump pulls it away quickly, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts
• Wide application: correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering