Top 5 Laundry Pump Byer

The SANICONDENS is a small pump that may be used to pump condensate from condensing boilers, HVAC system, water heater systems, etc. The SANICONDENS will pump condensate water up to 15 feet in height and/or 150 feet away from a soil stack. Condensate water has the potential to cause property damage or even create health hazards that can affect indoor air quality. Many times, the condensate is not able to drain through gravity to an existing drain line. This is the reason a condensate pump is essential to many residential and commercial applications. The inside of the SANICONDENS comprises of a float mechanism, which starts and stops the unit, and the motor, which drives the pump. When the water enters the SANICONDENS, it activates the float mechanism, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum. Water enters the chamber and is pumped away into the sanitary sewer. The unit pumps the effluent upward to 15 feet and/or 150 feet horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the float deactivates the unit until water enters the unit again. A normal operating cycle for the SANICONDENS can be as short as 2 – 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal. The discharge connection on the top of the unit comes equipped with a non-return valve, which prevents back flow into the unit. It is also highly recommended for the condensate pump to be connected to a Ground Fault Interrupter (GFI) circuit. The small, powerful pumping unit can be floor or wall mounted. It comes with an auxiliary external overflow switch that will shut down the appliance or alert the consumer in the event of overflow. It also includes all necessary hardware for ease of installation; 20 Ft of vinyl tubing, inlet adapter, discharge adapter

Product Description

105-0001 Features: -Drain pump package. -No filters to clog or maintain. -P-trap can be installed internally for compact installations. -Allows drainage from areas where gravity is not present. -Can be used with dishwashers, laundry trays and garbage disposals. -1 Year warranty. -Dimensions: 12.5" H x 14.5" W.

From the Manufacturer

Removes water from areas where gravity flow is not available. Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal applications. Glass-filled, polypropylene base with built in strainer on M53. Passes laundry lint and 1/2″ spherical solids

Product description

WRSC-6 Hz / Volts / Cord: 60 Hz / 115 Volts / 8′ Cord Features: -Completely assembled and ready to be installed.-Intermittent Liquid Temp. up to 125 F.-Epoxy coated cast iron housing.-Polycarbonate Cover.-Polypropylene Volute.-Nylon Impeller.-Carbon/Ceramic Shaft Seal.-Upper and lower bearings.-Automatic Operation.-Diaphragm switch Activator.-Switch on – 4-7” / Switch off – 1-3”.-HP: 1/3.-Hz: 50/60 or 60.-Tank Size: 3.5 Gallons.-GPM at 5′ of Head: 45′.-Maximum Head at 18′.-FNPT Top Vent Port: 2”.-Top Discharge Port: 1.5”.-Side Discharge Port: 1.5”.

From the Manufacturer

WRS Series, a convenient smaller sized tank and pump combo, is ideal for impractical gravity drainage areas such as under sinks and laundry trays. Includes: tank and pump with 8-Feet power cord. 1/3 Horsepower, 46 GPM at 5-Feet head, 115 V, 60 Hz.

LTP-1 Hartell Laundry Tray Pump, W/2 Gallon Reservoir, 115 Volt, 1/4 HP 1-1/2″ Inlet 1″ Outlet

1/4 HP Utility Sink Pump has a maximum discharge flow of 2,000 GPH and is ideal for basement laundry sinks, wet bars and utility sinks. The pump can be used for sinks where a gravity drain line is not available and the stainless-steel pump housing offers durability. The pump comes with an elbow and strainer for the sink drain, an adapter, check valve, O-ring and gasket seal for easy installation. Maximum discharge flow of 2,000 GPH Use for pumping drainage water without an in-ground basin Ideal for basement laundry sinks, wet bars and utility sinks where a gravity drain line is not available Stainless-steel pump housing offers durability No connection to main-stack vent required Includes an elbow and strainer for the sink drain, an adapter, check valve, O-ring and gasket seal for easy installation