Top 9 Jeep Liberty Double Din Dash Kit

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

Finally a Double Din Radio installation solution is in reach without having to pay tons of money for a custom handmade kit (these cost upwards of $349)!!! Installation Directions: 1. In the lower pocket area remove the one screw located in the center 2. Pry out on the factory bezel and separate it from the dash 3. Disconnect AC harness and the cigarette lighter 4. Remove the 4 Philip screws that hold the radio in place 5. Pull radio forward and disconnect the wire harness and antenna 6. Unmount the AC system from the factory bezel by removing the 4 Philip screws 7. Reattach that to the new double din bezel 8. Remove the old factory cigarette lighter and install on new double din bezel 9. Slide out the pocket liner and install on the new double din bezel 10. Remove radio supports by removing the 4 Philips (see picture gallery) 11. Use a drimmel or other plastic cutting device to remove the necessary plastic from the inside of the dash (see picture gallery) 12. Take the new bezel brackets and loosely attach to the new double din bezel 13. Dry fit your aftermarket double din radio into the bezel and remove/add any necessary trim rings/cages 14. Then line up aftermarket radio with the brackets and loosely screw through the brackets into the radio 15. Slide the aftermarket radio forward and back until you achieve a clean finish 16. Making sure the aftermarket radio is its square tighten all screws 17. Wire in the aftermarket radio to the aftermarket harness 18. Install antenna adapter 19. Reconnect the AC controls and lighter button with harnesses in the dash 20. Plug aftermarket wire harness into the factory radio harness. 21. Snap bezel into place and secure final screw in lower pocket area.

Dash Kit for 2002-2007 Jeep Liberty. Designed and manufactured with precision tolerances. High-grade ABS plastic construction. Factory matched texture style.

Double DIN Installation Dash Kit for Select 1990-Up GM Vehicles

Radio Dash kit, wire harness, and antenna adapter for installing an aftermarket radio- Dash kit works with a Double din Radio- Dash kit has a black finish- Wire harness and antenna adapter plugs into vehicle’s connections. Very Important: Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, Infinity, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). Will not retain some features like steering audio controls, rear DVD audio, etc- extra adapters required. Some off-brand radios might not be true Double Din Spec (slightly oversized/undersized) which means this kit will need to be modified or sanded down. Compatible with: Chrysler: 2011-2014 200, 2008-2010 300, 2008 – 2009 Aspen, 2007 – 2010 Sebring, 2008 – 2016 Town and Country; Dodge: 2007 – 2014 Avenger, 2009 – 2012 Caliber, 2008 – 2014 Challenger, 2008 – 2010 Charger, 2008 – 2011 Dakota, 2008 – 2009 Durango, 2008 – 2016 Grand Caravan, 2009 – 2010 Journey, 2008-2009 Magnum, 2006 – 2011 Nitro, 2009 – 2011 Ram 1500, 2010-2011 Ram 2500 / 3500; Jeep: 2008-2010 Commander, 2009 2010 2011 2012 2013 2014 2015 2016 Compass, 2008 – 2010 Grand Cherokee, 2008 – 2013 Liberty, 2009 – 2016 Patriot, 2007 – 2016 Wrangler, 2008 – 2009 Mitsubishi Raider, 2009 – 2013 Volkswagen Routan

Scosche CR1289B 2005-Up Chrysler / Dodge / Jeep Nav Stereo Replacement Kit

Installation Dash Kit for Single or Double DIN Radios For 2002-2007 Jeep Liberty vehicles Accommodates ISO Double DIN mount Designed and manufactured with precision tolerances Gapless fit between the dash and the kit Painted to match factory dash color Factory matched texture style High-grade ABS plastic construction

Double DIN Installation Dash Kit for select 2007-up Chrysler, Dodge, and Jeep Vehicles. Kit Includes: Radio Housing Brackets. Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit.

Metra 95-6511 Chrysler/Jeep DDIN 2007 Dash Kit