763 reviews analysed
1. Honeywell CQ100A1047 48-Inch Replacement Thermocouple for Gas Furnaces, Boilers and Water Heaters
2. Honeywell Q340A1108 48-Inch Universal Thermocouple
3. Honeywell Q340A1108/U Universal Thermocouple, 30Mv Output, 48″ Length
4. Thermocouple Replacement for Honeywell Tradeline Gas Furnace Water Heater 48″ Thermocouple Q340A1108
5. Earth Star Universal Gas Thermocouple 0.6 Meters Length Used on BBQ Grill or Fire Pit Heater or Gas Water Heater M8x1 End Nut and Head Tip
Description
Description Thermocouple TIP: M8*1 Thermocouple nut: M8*1 1.High quality & reasonable price 2.Provide customize 3.Certificate: CSA,ISO9001 4.Applicable gas families: NG/LPG/propane/butane 5.No-load potential: >=30mv(according to request) 6.Inner resistance: 5-50 +-3MΩ 7.Material: EP-NiGr EN-CuNi 8.Thermocouple temperature: -200 – 850 degree Celsius 9.Remove all sharp edges, burrs, the whole look beautiful; 10.Thermocouple head for the protection of carbon materials; 11.The thermocouple opens the valve time 3-5 seconds, closes the valve time 30±5 the second.
6. Honeywell Q390A1103 Universal Thermocouple
7. Reliance Water Heater 9007876 Gas Thermopile Assembly, Pack of 1
Description
Reliance, Natural Gas Thermopile Assembly, Includes Pilot Tube, Ferrule Nut Igniter Wire, Millivolt Generator & Bracket, Fits 301 Series Natural Gas Standard Tank Water Heaters. Reliance, natural gas thermopile assembly, includes pilot tube, ferrule nut igniter wire, millivolt generator & bracket, fits 301 series natural gas standard tank water heaters. INCLUDES ALUMINUM PILOT TUBE INCLUDES BRASS FERRULE AND NUT INCLUDES IGNITER WIRE INCLUDES MILLIVOLT GENERATOR INCLUDES BRACKET
8. Reliance Gas Thermopile Assembly 100112330 9007876005 9007870005 100093980 Water Heater Pilot Assy Compatible with Reliance, State, A.O. Smith, and American Branded Heaters
9. MENSI 24" Propane BBQ Grill, Firepit, Fireplace Heater Universal Gas Thermocoupler Sensor M8x1 Thread
Feature
- The Universal Thermocouple Total Length 24″
- Head thread size: M8*1, End Nut size to connect valve: M8*1
- Head Need to Be Keep Heated During Using ( If Stops working, Please adjust the Tip Location again)
- Volatge: ＞20mV, Open valve time less than 10s
- Used for gas fireplace, fire pit, grill, Stove, catering cooker, patio heaters etc
Description
*The thermocouple is an univesal thermocouple with M8x1 head and end.
*It can be used on Gas stove, grill, fire pit and fireplace, furnace etc.
*Easily install.
* CSA approved.
*Length 24inches.
*Copper Thickness 0.3mm.
*Head thread:M8X1.
Operation Instructions
1). install the thermocouple tip on a board and use two nuts to fix it’s location
2). Keep the tip at around 5mm distance from the burner hole in right height.
3). Faston the thermocouple nut M8 on the valve end tightly (Check if your valve end thread if 8mm before you buy)
4). Open gas and push your valve around 5-10s till the thermocouple head is heated enough.
6). Release your hand and it works properly
If when you release hand, gas valve shut off again, Please check
a. If your thermocouple is always be heated on flame
b. If the thermocouple end is well connect with valve
10. MENSI Robertshaw Thermostat Control Pilot Burner Assembly Replacement 1980-024 & 1980-036 Snap Fit Universal Thermocouple (24")
Description
Robertshaw Thermostat Control Pilot Burner Assembly Replacement of 1980-024
Conclusion
By our suggestions above, we hope that you can found Honeywell Thermocouple 48 Inch for you.Please don’t forget to share your experience by comment in this post. Thank you!
