667 reviews analysed
1. Honeywell 5808W3 Wireless Photoelectric Smoke/Heat Detector
Feature
- Improved Robust RF Field Strength: The distance between the detector and receiver has been significantly increased without the need for a repeater
- Smart Check: A signal is sent to the control panel when the detector requires cleaning. This allows a regular nonemergency service call to clean the detector before it goes into alarm.
- Approved UL Listings for Residential and Commercial Applications: Both residential and commercial installation requirements are met
- Additional LED Status Indicators: Identifying between alarm or trouble conditions is a snap with green and red LED status indicators. A green LED denotes a normal condition while the red LED indicates abnormal conditions.
- Easy to install Mounting Base: The sturdy mounting base allows the detector to be more easily installed on uneven surfaces (i.e. stucco). The mounting base has larger mounting ports which accommodate drywall anchors for easy surface mounting.
2. Honeywell SiX Two-Way Wireless Technology Smoke Detector
3. System Sensor 2W-B i3 Series 2-wire, Photoelectric i3 Smoke Detector
4. Honeywell R8184G4009 International Oil Burner Control
Feature
- Oil Burner Protector lay Intermittent Control
- Three wiring terminal options available for easy installation
- This is manufactured in United States
- Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
- Solid state flame sensing circuit
- Enclosed safety switch with external reset button
- Manual trip lever opens safety switch for system maintenance
- C554A Cadmium Sulfide Flame Detector and 24 VAC thermostat required
Description
Product Description
Three wiring terminal options available for easy installation: Push-in receptacles for stripped wire Female receptacles for 1/4″ male flag connectors Field add-on screw terminals Controls adapt to many competitive mounting holes in replacement applications Available in a variety of fan and high limit setting ranges L4064B,W models have manual fan switch that overrides fan control to keep fan running continuously Fan Close on Rise, Limit Open on Rise. Turns fan on and off according to plenum temperature. With helical bimetal sensing element. High limit stop set at 200° F (93° C). With manual fan switch. Small case and cover. Replaces L4064A, B, E. This is manufactured in United States.
From the Manufacturer
Provides automatic, no recycling control of an intermittent ignition oil burner system
5. Honeywell Ademco 5806W3 Wireless Smoke Detector
6. Honeywell C7232A1016 Carbon Dioxide Sensor
Feature
- Wall Mount CO2 Sensor, with no display, 0/2-10Vdc or 0/4-20mA output
- Models available with LCD that provides sensor readings and status information
- Non-Dispersion-Infrared (NDIR) technology used to measure carbon dioxide gas
- Gold-plated sensor provides long-term calibration stability
- C7232 provides voltage or current output based on CO2 levels
7. ICM Controls ICM1503 Oil Primary, Intermittent Ignition, Flame Sensing Circuit, 45 Sec, Safety Switch, Reset Button
Feature
- Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
- Solid state flame sensing circuit
- LED on terminal strip indicates system lockout
- Enclosed safety switch with external reset button
- Mounts on standard 4×4 J-Box (select models may be mounted directly on burner housing)
8. ICM Controls ICM1501 Intermittent Ignition Oil Primary Control with 15 Seconds Safety Timing, Replacement for R8184G Series Honeywell
Feature
- Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
- Solid state flame sensing circuit
- LED on terminal strip indicates system lockout
- Enclosed safety switch with external reset button
- Mounts on standard 4×4 J-Box (select models may be mounted directly on burner housing)
9. R8184G-4009 – OEM Upgraded Replacement for Honeywell Protectorelay Oil Burner Control Board
Description
This is a Brand New OEM Protectorelay Oil Burner Control Board
10. Honeywell Protectorelay Oil Burner Control Automatic, Standard 24 V
Conclusion
By our suggestions above, we hope that you can found Honeywell Smoke Detector Controller for you.Please don’t forget to share your experience by comment in this post. Thank you!
