Top 10 Honeywell Miller G2 Connector

The Miller Turbo T-BAK Personal Fall Limiter is the first retractable designed to tie back anywhere along the lifeline, offering more tie-off anchorage locations with a greater variety of beam-size options. The all-in-one, self-retracting lifeline/anchorage connector design is both safer and more cost-effective than tie-back shock-absorbing lanyards. Safer because it eliminates tripping hazards and arrests free falls within inches. More cost-effective because it reduces the amount of equipment required to purchase and use on the job site, which in turn reduces the need for frequent gear changes. This saves time and increases productivity. The high-strength EXTREME webbing is abrasion-resistant and features white side stripe stitching to indicate it is specially designed for tie-back applications. Miller’s patented 5K locking snap hook is also purpose-designed for tie-back use, boasting a 5,000 lb (22 kN) gate load capacity from any angle. This ensures the hook will not fail if load forces are concentrated on the face or side of the hook. Various unit end connector options are available. Twin unit offerings include two options for 100% tie-off fall protection: the D-ring connector system, which connects directly to the safety harness back D-ring, and the G2 connector system. The G2 is the lightest twin connector available, and features a rotating webbing retainer clip to prevent the gate from opening. This tie-back PFL meets all applicable OSHA, ANSI, CSA and CE standards, including the ANSI Z359.14-2012 requirement that states only 24-inches (.61 m) or less of lifeline extends out of the housing when the unit is fully retracted.

Qibaok Crimping Tool Kit with 1550PCS 2.54mm Dupont Connectors and 760pcs 2.54mm JST-XH Connectors
Product Specifications：
Brand: Qibaok
Weight: 2.16lb/0.98KG
Material: Alloy Steel,Brass, ABS Plastic
Crimping Size Range: AWG26-20(0.1-0.5mm²)
Feature: 
Wire-electrode cutting die
Ratcheting mechanism design
Ergonomic Handle
Package Included:
✔1 x Dupont Crimping Tool
✔1 x 1.5m (5 Ft) 10-Wire Ribbon Cable
✔1550 PCS Dupont Connectors Kit:
● 200 PCS x Female Pin Connectors
● 200 PCS x Male Pin Connectors
● 80PCSx 1x1P Pin Connectors Housing
● 60PCSx 1x2P Pin Connectors Housing
● 40PCSx 1x3P Pin Connectors Housing
● 40PCSx 1x4P Pin Connectors Housing
● 40PCSx 1x5P Pin Connectors Housing
● 30PCSx 1x6P Pin Connectors Housing
● 30PCSx 1x8P Pin Connectors Housing
● 30PCSx 1x10P Pin Connectors Housing
● 10PCSx 40 Pin 2.54mm Single Row Straight Angle Header
● 10PCSx 40 Pin 2.54mm Pitch Single Row Right Angle Header
✔760 PCS  2.54mm JST-XH Connectors Kit:
●500 PCS XH 2.54mm Pitch Female Pin Connectors
●30PCS XH-2A JST 2.54mm Pin Male Plug
●30PCS XH-3A JST 2.54mm Pin Male Plug
●30PCS XH-4A JST 2.54mm Pin Male Plug
●20PCS XH-5A JST 2.54mm Pin Male Plug
●20PCS XH-6A JST 2.54mm Pin Male Plug
●30PCS XH-2Y JST 2.54mm Female Housing Socket
●30PCS XH-3Y JST 2.54mm Female Housing Socket
●30PCS XH-4Y JST 2.54mm Female Housing Socket
●20PCS XH-5Y JST 2.54mm Female Housing Socket
●20PCS XH-6Y JST 2.54mm Female Housing Socket
Applications:
Crimping tool is suitable for XH 2.54mm / C3-R 2.54mm / Dupont Pins2.54 / JST type connectors / EPS / PCIE / SATA connections etc.
Friendly Customer Service & Warranty:
If for any reason you are not satisfied with your purchase, please do not hesitate to contact us.Thank you.

Easiest wire connector on the market

TICONN solder seal connectors will make your wire connection waterproof just in seconds;

also it applies mechanical damage protection and prevents wire corrosion!

Our connectors are an irreplaceable tool for fast, reliable and effective wire connection in any place and are appreciated by handymen all over the world!

Package Includes:

40 x White Connectors: Suits Cable/ Wire Sizes 0.25-0.34mm² (A.W.G:26-24);

50 x Red Connectors: Suits Cable/ Wire sizes 0.5-1.0mm² (A.W.G:22-18);

50 x Blue Connectors: Suits Cable/ Wire sizes 1.5-2.5mm² (A.W.G:16-14);

10 x Yellow Connectors: Suits Cable/ Wire sizes 4.0-6.0mm² (A.W.G:12-10)

HOW TO USE:

 1.Select the proper size connector for the wires, stripped wires.

 2.Insert the stripped wires into the connector.

 3.Apply heat evenly to the connector from the 2 ends first until tubing shrinks and the adhesive flows, then continuously apply heat evenly until solder sleeve melt and seal.

Note:

 1.For best result, please use a hot air gun and rotate the connector to evenly apply heat.

 2.Please raise the temperature from low to high gradually when you use the hot air gun to heat the wire connector.

 3.Please DO NOT set the high temperature at the beginning, or the surface of connector will be over-heated, which will lead to the tube melt while the solder ring still not melt.

 4.Keep the hot air gun at the proper distance. Don’t get too close.

Technical Specifications:

  Shrinkage ratio 2:1

  Minimum shrink temperature: 80°C

  Minimum temperature for solder to melt: 138°C

  Operating temperature :-55℃ – 125℃

  Waterproof Class: IP 67

Easiest wire connector on the market – TICONN 200 PCS Heat Shrink Butt Connectors

Whether you are working on your boat, vehicle, home or scientific projects, TICONN heat shrink butt connectors will ensure strong crimps, increased current flow and waterproof connections every time!

Features: 
Comply with all Relevant European Standards, Shrinkage Ratio: 3:1. 
Dual-walled: polyolefin tubing on the outside and hot melt adhesive in inside. 
Wire gauge imprint on connectors and color identification.
Ideal translucent provides tensile strength, allows visual inspection.
Allows visual inspection, prevents corrosion, and provided a waterproof seal.
Specification:
–Shrinkage ratio 3:1
–Minimum shrink temperature: 80°C
–Full recovery temperature: 130°C
–Operating temperature: from -55°C to 125°C

Note:

For best results, please choose the right connector, use a hot air gun, heat evenly until connector reduces in size and the adhesive flows, filling gaps within the terminals.

Package Includes:

90 x Red Connectors: Suits Cable/ Wire Sizes 0.5-1.0mm² (A.W.G:22-16);

90 x Blue Connectors: Suits cable/ wire sizes 1.5-2.5mm² (A.W.G:16-14);

20 x Yellow Connectors: Suits cable/ wire sizes 4.0-6.0mm² (A.W.G:12-10);

1 x PP Storage Case

Guarantee & Friendly Customer Service:
TICONN guarantees all buyers 100% satisfaction, once you find any problem of the product, please feel free to contact us, we will solve it as soon as we can.

100% Satisfaction Guarantees for risk-free shopping!

Glarks 6 Sets 2 3 4 6 8 12 Pin DT Series Sealed Gray Male and Female Auto Waterproof Electrical Wire Connector Plug

Specification:
Product Type: DT Series waterproof wire electrical connector plug
Pin Number: 2 3 4 6 8 12
Color: Gray
Wire Gauge: 22-16 AWG
Current Rating: 13 Amps
Operating Temperature: 14°F (-10°C) to +176°F (80°C)

Product Feature:
☛ High quality environmental-friendly nylon materials, wear-resistant for long time use.
☛ Connector terminals use high-precision phos-copper plating process for high conductivity.
☛ Buckle design ensures accurate and complete insertion, not easy to slide and fall off.
☛ DT Series connectors offer reliability and rugged quality. Optional in-line, flange, or PCB mount.
☛ Suitable for various wire connectors of motorcycle, scooter, car, truck, quad bike, caravan, marine, jet ski, boats.

Package Detail:
DT04-2P x 1
DT04-2S x 1
DT04-3P x 1
DT04-3S x 1
DT04-4P x 1
DT04-4S x 1
DT04-6P x 1
DT04-6S x 1
DT04-8P x 1
DT04-8S x 1
DT04-12P x 1
DT04-12S x 1
Male Terminal x 35pcs
Female Terminal x 35pcs

♥♥Note:
♡ Please check the specific size according to the second picture. The products are manual measurement and there may be 0.1-0.3mm errors. Please don’t mind.
♡ if you have any questions, please feel free to contact us, we will reply you within 12 hours.

100% Brand new high quality insulated crimp terminals connectors
Package quantity: 540pcs

Red
Wire range: 0.5~1.5mm², A.W.G.:22~16, Max.current = 19A

Blue
Wire range: 1.5~2.5mm², A.W.G.:16~14, Max.current = 27A

Yellow
Wire range: 4~6mm², A.W.G.:12~10, Max.current = 48A

Package includes:
Ring M4——————————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Ring M5——————————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Ring M6——————————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Fork Spade M4———————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Fork Spade M5———————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Spade 250 Male (Semi-insulated)——-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Spade 250 Female (Semi-insulated)—-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Spade 250 Female (Fully-insulated)—-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Butt Splice—————————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Piggy back—————————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Bullet Male—————————————45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)
Bullet Female ———————————-45pcs(Red: 20pcs, Blue: 15pcs Yellow: 10pcs)

NOTE: For best results, please use profession crimping tool

Welding cable quick connector male-female pair with accessories.DINSE style connection. For AWG wires #4-#1 (35-50 sq mm) with 200Amp-300Amp current rating.