Top 10 Ge Thin Line Breakers

0
772 reviews analysed

1. Connecticut Electric THQL2180 Ge Type Thql Q-Line Standard Circuit Breaker, 120/240 Vac, 80 A, 2 P, 10 Ka, Amp

Connecticut Electric THQL2180 Ge Type Thql Q-Line Standard Circuit Breaker, 120/240 Vac, 80 A, 2 P, 10 Ka, Amp

Feature

Description

Product Description

GE circuit breaker, type thql, q-line, standard, 120/240 vac, 80 a, 1 phase, the frame, fixed trip, 800 a trip, 10 ka interrupt, 2 poles, 6 – 1/0 AWG/4 – 1/0 AWG wire, lug terminal, plug in mounting, 60 – 75 deg c, 3.28 in overall length, 2 in overall width, 2.38 in overall depth, thermoset, ansi specified, CSA certified, UL listed, 2 in spacing. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. may be used, when marked to accept, with American switch, arrow Hart, Bryant, general switch, gte, sylvania, most item, Murray, Westinghouse type br, Challenger, Crouse-Hinds. 15 to 30 amp 14 – 8 cu or 12 – 8 AL AWG wire, 35 to 60 amp 8 – 3 cu or 8 – 2 AL AWG wire, 70 to 100 amp 6-1/0 cu or 4 – 1/0 AL AWG wire. Ul listed, Hacr rated. 120/240 volt; 10, 000 air. 1&Quot; per pole (2" TOTAL).

From the Manufacturer

This 120/240 volt GE 80 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

2. Connecticut Electric THQL2190 Ge Type Thql Q-Line Standard Circuit Breaker, 120/240 Vac, 90 A, 2 P, 10 Ka, Amp

Connecticut Electric THQL2190 Ge Type Thql Q-Line Standard Circuit Breaker, 120/240 Vac, 90 A, 2 P, 10 Ka, Amp

Feature

Description

Product Description

GE circuit breaker, type thql, q-line, standard, 120/240 vac, 90 a, 1 phase, the frame, fixed trip, 900 a trip, 10 ka interrupt, 2 poles, 6 – 1/0 AWG/4 – 1/0 AWG wire, lug terminal, plug in mounting, 60 – 75 deg c, 3.28 in overall length, 2 in overall width, 2.38 in overall depth, thermoset, ansi specified, CSA certified, UL listed, 1 in spacing. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. may be used, when marked to accept, with American switch, arrow Hart, Bryant, general switch, gte, sylvania, most item, Murray, Westinghouse type br, Challenger, Crouse-Hinds. 15 to 30 amp 14 – 8 cu or 12 – 8 AL AWG wire, 35 to 60 amp 8 – 3 cu or 8 – 2 AL AWG wire, 70 to 100 amp 6-1/0 cu or 4 – 1/0 AL AWG wire. Ul listed, Hacr rated. 120/240 volt; 10, 000 air. 1&Quot; per pole (2" TOTAL).

From the Manufacturer

This 120/240 volt GE 90 amp, double pole, thick series replacement circuit breaker is used in a General Electric load center and/or used for feeding Sub-Feed Panel Boxes. This is only a suggestion and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project.

3. GE Energy Industrial Solutions TQD22200WL Double Pole Bolt on Breaker with Lug, 200-Amp

GE Energy Industrial Solutions TQD22200WL Double Pole Bolt on Breaker with Lug, 200-Amp

Feature

4. Thql2150gfp 2 Pole 120/240vac 10k Aic 50 Amp Gfci

Thql2150gfp 2 Pole 120/240vac 10k Aic 50 Amp Gfci

Feature

Description

GE, 50A, Double Pole, Ground Fault Interrupter Circuit Breaker, 120/240VAC, 10KAIC, Carded.

5. Q2100 100-Amp Double Pole Type QP Circuit Breaker

Q2100 100-Amp Double Pole Type QP Circuit Breaker

Feature

Description

Size:100 Amp |  Style:1 Pack

Product Description

Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home’s electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution, mitigate the risk of electrical fires and protect against damaging surges and Voltage spikes. Circuit breakers are intended for switching and protection of your home’s wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of your electrical system, there are potentially dangerous conditions that do not involve over current. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. Siemens strongly recommends against the use of “used” breakers. The installation of used breakers in a Siemens panel will void the warranty on the panel. Siemens does not sell used breakers and has not approved any 3rd party sellers to do so.

From the Manufacturer

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.

6. Eaton BRSURGE Br Series Whole-Panel Surge Arrest Breaker

Eaton BRSURGE Br Series Whole-Panel Surge Arrest Breaker

Feature

Description

Plugs into a single-phase type br load center and occupies two 1-inch pole spaces provides whole panel surge protection when plugged into the first two tabs at the top of the load center just below the main breaker or main lug led visual indicators Si.

7. Siemens MC0816B1200CT 8 Space, 16 Circuit, 200-Amp Main Breaker Meter Combination With A Ring Type Cover

Siemens MC0816B1200CT 8 Space, 16 Circuit, 200-Amp Main Breaker Meter Combination With A Ring Type Cover

Feature

Description

Siemens meter load center combinations feature a 200 Amp rated meter socket combined with a 200 Amp main breaker service disconnect, available branch circuits, and feed thru lugs. The extra circuits allow for outdoor circuits to be wired directly from this panel, saving wire and installation time. Utility acceptace for all metering products varies, so check your local utility for acceptance before installing.

8. GE THQL2130GFT Plug-In Mount Type THQL Feeder Self-Test Ground Fault Circuit Interrupter 2-Pole 30 Amp 120/240 Volt AC

GE THQL2130GFT Plug-In Mount Type THQL Feeder Self-Test Ground Fault Circuit Interrupter 2-Pole 30 Amp 120/240 Volt AC

Feature

9. GE Q-Line A-Series II Miniature Circuit Breaker, 120/240 VAC, 15 A, 10 kA, 3 Poles, Non-Interchangeable Trip

GE Q-Line A-Series II Miniature Circuit Breaker, 120/240 VAC, 15 A, 10 kA, 3 Poles, Non-Interchangeable Trip

Feature

Description

GE Miniature Circuit Breaker, Series: Q-Line A-Series II, 120/240 VAC, 15 A, 10 kA Interrupt, THQB Frame, Non-Interchangeable Trip, 3 Pole, 3, Load Lug Connection, 14 to 8 AWG/12 to 8 AWG Wire, Bolt-On Mount, 3-9/32 in H x 3 in W x 2-3/8 in D

10. GE Breakers THQL2115GF1 15A, 2P, 120V, 10 kAIC, Q-Line Ground Fault CB

GE Breakers THQL2115GF1 15A, 2P, 120V, 10 kAIC, Q-Line Ground Fault CB

Feature

Description

Mfr Brand Name: GE / Catalog No.: THQL2115GF1 / Product Name: GE THQL2115GF1 15A 240V 2P 10K NEW GROUND FAULT / Model: THQL2115GF1 / Poles: 2 / Amps: 15 / Volts: 240 / AIC: 10

Conclusion

By our suggestions above, we hope that you can found Ge Thin Line Breakers for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general