Top 10 Ge Cartridge Fuse 20

Microwave fuse 20 Amp 250V 6×30 mm/0.24×1.2 in(Dia x Len)

Key Remind:

1.shut down power before you replace

2.check your original size of fuse, mainly several parameters, body diameter, body len, rate current, rate voltage

Most Important Point

Question: Why does my microwave fuse offen burnt after I replace fuse not long?

Answer:Microwave fuse should use slow-blow type because its loading will increase much when microwave starts. It needs a little overload when machine starts(only a short time). So some people replace it with fast-acting fuse and cause burnt frequently. Using wrong type fuse.

Question:What type appliances are need slow-blow(time-delay)fuse?

Answer:Normally inductive appliance needs. This type device’s current loading will be much high when it starts, like surge current impact.Common microwave,motor, metal halide light. Yet resistant loading like electrical heating tube is not need.

Description:
Protect your investment with a Zephyr ceramic slow acting fuse. Many of today’s electronics and home appliances are protected by fuses in case of a power spike. UL/CSA 248-14 compliant design ensures a low breaking capacity, and thus offers immediate disconnect of power should the amperage exceed that of the fuse rating. Other / inferior slow acting fuses may vary by as many as 1-2 amps, meaning your 8 amp fuse might not blow until power spikes to 10 amps. Don’t let a poorly made fuse be the cause of electrical damage to your investments.

Specifications:
Diameter: 5mm (3/16″)
Length: 20mm (3/4″)
Amp Rating: 10A
Voltage Rating: 250V
Body Material: Ceramic
Fuse Type: Slow Acting Blow (Slow Burn)

Packed in a plastic box.
Making from high quality glass material.No plumbum.
The glass tube fuse comes with quick blow function.
RoHS compliant.
100% brand new and high quality 5x20mm and 6x30mm Fast-blow Glass Fuses Quick
Application:
Mainly used for protecting the electrical circuit against overload and short-circuits, it also may derive for protecting the semiconductor device. Protection against overload and short circuit in electric lines.
Those glass tube fuses are packaged in a clear plastic box for keeping different Ampere values separated and easy to access.
Notice: Need professional knowledge to use this product
Package Includes:
6x30mm
15 x 1A fuse
15 x 2A fuse
15 x 3A fuse
15 x 5A fuse
15 x 6A fuse
15 x 7A fuse
15 x 8A fuse
15 x 10A fuse
15 x 15A fuse
15 x 20A fuse
5x20mm
20x 1A fuse
20 x 5A fuse
20x 10A fuse
20 x 15A fuse
20 x 20A fuse

The Best New Microwave Fuse, Ceramic Fuse, Cartridge Fuse 20A 250V Slow-Blow for GE WB27X10388, Whirlpool Kenmore,Compatible With the Most of Other Microwaves (5-Pack)

Specification:
Brand new
Body Material : Ceramic
Size: 6x30mm
Amp Rating: 20A
Voltage Rating: 250V
Fuse Type : Slow Blow (Time Delay)

Package included:
10 Pcs x 20 Amp Slow-Blow Time Delay Fuse Ceramic 6x30mm.

With the Power Gear Type T/TL Fuse, momentary overloads won’t blow the fuse. Replaces standard Type-W fuses. Time delay. 20-Amp. 2-Pack.

Product Description

Automotive: Used in older-model cars, glass tube fuses today are found primarily in automotive accessory applications. Appliances & Consumer Electronics: Glass and ceramic tube fuses are often used to protect appliances and consumer electronics. As electronic equipment becomes smaller, the circuits and components become more delicate and easily damaged. Fuses are the preferred method of protection due to their accuracy, small size and reliability. Fuses are available in a wide variety of amp ratings to provide precise protection. Generally, two sizes of user-replaceable fuses are found: the 1/4-Inch x 1-1/4-Inch and 5mm x 20mm. Each is available in a variety of volt and amp ratings. There are two basic types of fuses available for appliances and consumer electronics: fast-acting or time-delay. Any replacement fuse must match the one it’s replacing. In general, fast-acting fuses are a single strand of wire or strip of metal. Time-delay fuses usually have a coiled wire, a thick element wrapped in wire, or a spring. Most electronic fuses will have the voltage and amp rating stamped on the end cap. The type of fuse can generally be visually identified. Also, owner’s manuals will have the correct replacement fuse generically identified.

From the Manufacturer

GMA – UL 5mm X 20mm Fast-Acting Glass Tube Fuse. Automotive: Used in older-model cars, glass tube fuses today are found primarily in automotive accessory applications. Appliances & Consumer Electronics: Glass and ceramic tube fuses are often used to protect appliances and consumer electronics. As electronic equipment becomes smaller, the circuits and components become more delicate and easily damaged. Fuses are the preferred method of protection due to their accuracy, small size and reliability. Fuses are available in a wide variety of amp ratings to provide precise protection. Generally, two sizes of user-replaceable fuses are found: the 1/4-Inch x 1-1/4-Inch and 5mm x 20mm. Each is available in a variety of volt and amp ratings. There are two basic types of fuses available for appliances and consumer electronics: fast-acting or time-delay. Any replacement fuse must match the one it’s replacing. In general, fast-acting fuses are a single strand of wire or strip of metal. Time-delay fuses usually have a coiled wire, a thick element wrapped in wire, or a spring. Most electronic fuses will have the voltage and amp rating stamped on the end cap. The type of fuse can generally be visually identified. Also, owner’s manuals will have the correct replacement fuse generically identified. For example: “Use a 2 amp, time-delay, 250 volt fuse.” Glass and ceramic tube fuses vary by diameter and length. This fuse is 5mm diameter and 20mm long.

Fuses are designed for use in circuits found in motorized appliances and equipment, such as washers, dryers, furnaces and air conditioners. The Cartridge Fuse is for use in pull-out style fuse blocks. 30-Amp. 2-Pack.