Top 10 Flow Meter Water Cooling 10Mm16mm

Alphacool Eisflügel: The flow indicator with extra value! A water cooling system inside a computer is also there to make an impact on the overall appearance. Neatly laid hoses or HardTubes make for an impressive picture. With the Alphacool Eisflügel, you can add another real eye-catcher to your system. The fan’s silent rotation will always show the direction of the flow. Technical Details Dimensions: 88 x 40 x 15mm Compression resistant up to 2 bar, max. Connection: for hoses with 6-11mm inner diameter Material: ABS Scope of Delivery 1x Alphacool Eisfluegel flow indicator red 6-11mm – plexi

Features:

Suitable for PC water cooling system. 6 impeller water flow meter, helps you to observe the speed and working states of the water flow. Made of high-quality POM and acrylic material, durable to use. Easy to install and use.

Specifications:

Color: Black

Material: Acrylic + POM

Screw Thread: G1/4

Interface Diameter: 12.9mm

Size: Approx. 4 * 4 * 2.5cm

Weight: 38g

Package List:

1 * 6 Impeller Flow Meter (Connectors or plugs are NOT included.)

Bitspower water flow monitor for water-cooling systems with Digital RGB LED

Model: BP-HFI-DRGB

Specification:
Model: 2 Way, 3 Way (optional)
Applicable accessories type: computer water flow meter
Material: POM+ Acrylic
Thread: G1/4 2 points thread
Size: Approx. 4 * 4 * 2.5 cm/ 1.6 * 1.6 * 1.0 in
Weight: Approx. 40 g

Package list:
1 * Water Cooling Flow Meter

Inline filter with replaceable stainless steel mesh. Supplied with replacement mesh filter and two replacement o-rings.

Model: 5060596650343

Bitspower water flow monitor for water-cooling systems. Model: BP-FI-CLBKWH.

Koolance patented quick disconnect no-spill coupling with automatic shutoff. 10mm (3/8in) ID, 16mm (5/8in) OD male straight connection with compression fitting. It will only fit a Koolance QD3 female quick disconnect.

After pulling the ring on the female QDC side, the quick-disconnect fittings will separate. Liquid on both sides will be automatically obstructed with approximately 0.2ml freed. Coolant volume lost upon disconnection will rise with internal pressure higher than 0.5kgf/cm2 (7psi).

Additional Specifications

• Materials: Brass, Stainless Steel, EPDM
• Max Temperature: 100°C (212°F)
• Max Pressure @ 25°C: 8kgf/cm2 (113.8psi)

EK-Torque STC 10/16 Black fittings are EK’s new minimalistic 10/16mm (ID/OD) soft-tube compression fittings designed for use with various flexible soft tubing types such as PVC, EPDM, Norprene, silicone or any other type of compatible flexible tube. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.

The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored rings are available in many colors and are screwed onto the fitting before the compression locking ring. The aesthetic rings are sold separately.

The fitting barb and the compression rings are covered with a unique, high-quality black finish. Both are made of CNC machined brass and the seal is made quality rubber O-rings.

The base fitting surface is smooth and has no adequate gripping surface, but the inside of the barb is socketed with a 9mm hex Allen key pattern. It’s highly recommended to use an Allen Key 9mm (purchased separately) to prevent skin damage to the fingertips while installing the fitting. 

Technical data:
– Finish: Satin Black
– Thread: G1/4″ BSPP; 4.5mm male thread length
– Supported tube: 10/16mm (ID/OD)
– The outer diameter of a fitting: 23mm
– Installed height: 19mm

PLEASE NOTE:

• Do not use excessive force when attaching fitting barbs using Allen Key 9mm in order to prevent damage!
• This product should NOT be installed with any aluminum Fluid Gaming parts!
• The aesthetic rings are sold separately.

Model: TR-3831109814437-4P

The Bitspower G1/4 Thread Flow Sensor is a great way to install a safety valve into your looping loop. Just install this flow sensor into your cooling loop and connect the rpm cable on your motherboard CPU fan header. Once installed the flow sensor will send the RPM signal to the mainboard thus allowing you to utilize the BIOS safety settings. These can also be used on fan controllers and other RPM sensing devices as well! Model: BP-FS-CLBKDBR.

Specifications:

Color: Black

Material: Acrylic + POM

Screw Thread: G1/4

Interface Diameter: 12.9mm

Size: Approx. 4 * 4 * 2.5cm

Weight: 38g

Package List:

1 * 6 Impeller Flow Meter (Connectors or plugs are NOT included.)