677 reviews analysed
1. DEWALT DCW600B 20V Max XR Compact Router (Tool Only)
- Dual LED lights help illuminate the work surface
- Depth adjustment ring allows for fast and easy height adjustments
- Electronic brake slows the motor down faster after the unit is shut off
- Variable speed dial allows the user to match speed of of the router to the application
- Soft start motor with full-time electronic Feedback allows the motor to maintain speed during cuts
The 20V max* XR Cordless compact router provides power like a corded compact router while providing the convenience of a cordless tool. The plastic fixed base and dual LED lights help to illuminate the work surface and provide superior bit visibility. This cordless router is equipped with variable speed control for optimal bit speed in each application. The release clamp allows for quick and easy bit and base Change.
2. DEWALT DCK283D2 20V MAX XR Compact Cordless Drill/Driver & Impact Driver Combo Kit
- MAX RUNTIME: Powerful motor for maximum runtime
- DRILL/DRIVER: DCD791 20V MAX* XR Lithium Ion Compact Brushless 1/2″ Drill/Driver
- IMPACT DRIVER: DCF887 20V MAX* XR Lithium Ion Brushless 1/4″ Impact Driver
- COMPACT DESIGN: Ergonomic, compact design allows for drilling and driving in tight spaces
- LIGHTWEIGHT: Among one of the lightest saws in its class at 8.8 lbs
- INCREASED VISIBILITY: 3-mode LED light for visibility in dark spaces.3 LED lights embedded in front of tool with 20-second trigger release delay providing increased visibility in dark or confined spaces
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
The DEWALT DCK283D2 20V MAX XR Compact Cordless Drill/Driver & Impact Driver Combo Kit from DEWALT has a powerful motor to deliver maximum run time. This drill and impact set features a lightweight, compact design that fits easily into tight areas. The 3-mode LED light gives users visibility in dark spaces.
3. Ridgid R86011B OCTANE 18V Lithium Ion Cordless 1/2 Inch Impact Wrench w/ Belt Clip (Battery Not Included, Bare Tool Only)
- ADJUSTABLE: Four speed settings are available for you to work with different types of fasteners
- TRI-BEAM LED: Lights around the chuck activate upon pulling the trigger. If you want to turn them on outside of use, a separate trigger is available for you to use
- AUTO MODE: Set the wrench to auto mode and it will automatically shut off once your subject is fully tight to prevent stripping
- BIT EJECTION: Easily remove bits from the tool by simply pulling back on the collet.
- BRUSHLESS: A brushless motor on this auto wrench keeps the tool lasting longer and working harder than its brushed counterparts
4. Cordless Electric Ratchet Wrench, 3/8" 40 Ft-lbs 400 RPM 12V Power Ratchet Wrench Kit w/ 60-Min Fast Charge, Variable Speed Trigger, 2-Pack 2.0Ah Lithium-Ion Batteries, 8 Sockets
- 【Eliminate Cords & Loud Air Hose】With a max torque of 40 ft-lbs at 400 RPM and a variable speed trigger, KIMO Cordless Ratchet performs just like your air ratchet but without the annoying cords and the constant loud noise from the air hose.
- 【Compact & Lightweight】Weighs merely 2.2 lbs (w/ battery) plus its ultra-slim head design, KIMO Electric Ratchet can reach any tight spots to ratchet nuts and bolts effortlessly, making it perfect for any auto maintenance, construction or home repair work.
- 【Proudly Present 2 KIMO Batteries】Over 25 years, KIMO has kept updating its batteries to the best of its kind. It’s guaranteed that the life expectancy of each KIMO 12V battery is at least 1,000 cycles. Stop worrying about dying batteries or batteries that won’t charge after minimal usage. KIMO’s got your back!
- 【Built-in LED & Ergonomic Handle】KIMO equipped this ratchet wrench with 2 pieces of rubber that withstand corrosive materials and increase your comfort when using. Its built-in LED illuminates the work area while the on-board fuel gauge displays remaining run time.
- 【Power Ratchet Wrench Work Kit】Comes with 2 X 1000-Charge Cycle 20V 2.0Ah KIMO Power Batteries, 1 X 60-minute Fast Charge, 1 X KIMO BMC Case, 7 X sockets, 1 X 3/8-Inch to 1/4-Inch drive adapter. KIMO has provided you with an all-you-need Ratchet Wrench Work Kit plus a 12-month warranty.
5. Makita XFD12Z 18V LXT Lithium-Ion Brushless Cordless 1/2" Driver-Drill, Tool Only,
- Mechanical 2-speed transmission (0-500 & 0-2,000 RPM) for a wide range of drilling and fastening applications
- BL Brushless motor delivers 530 in.Lbs. Of max torque
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
6. Makita XDT16Z 18V LXT Lithium-Ion Brushless Cordless Quick-Shift Mode 4-Speed Impact Driver, Tool Only
- Quick-shift mode uses the Brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Bl Brushless motor delivers 3, 600 max RPM and 1, 600 in.Lbs. Of max torque
- 4-Speed power selection (0-1, 100/ 0-2, 100/ 0-3, 200/ 0-3, 600 RPM & 0-1, 100/ 0-2, 600/ 0-3, 600/ 0-3, 800 IPM) provides precise fastening control for a wide range of applications
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Assist mode (a-mode) feature helps eliminate “screw cam-out” And “cross threading” By driving at low speed until tightening begins
7. Makita XPH10Z 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill (Tool Only)
- Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque
- Variable 2-speed design (0-600 & 0-1,900 RPM) covers a wide range of drilling, driving and hammer applications
- Compact and ergonomic design at only 7-3/4″ long
- Weighs only 3.4 lbs. with battery for reduced operator fatigue
- Dual L.E.D. lights with afterglow illuminate the work area
The Makita 18V LXT Lithium-Ion Cordless 1/2-Inch Hammer Driver-Drill (tool only) combines speed and torque in a compact size. For increased versatility, it can be run as a driver-drill or a hammer driver-drill, and is engineered for applications in wood, metal, masonry, and concrete. The Makita-built four-pole motor that delivers 480 in.lbs. of Max Torque and up to 1,900 RPM and 28,500 BPM in the high-speed setting. It weighs only 3.4 lbs. (with battery, sold separately) for increased comfort. With Extreme Protection Technology (XPT), the drill is engineered for increased dust and water resistance and is ideal for use in harsh jobsite conditions. It’s part of Makita’s expanding 18V Lithium-Ion series, the world’s largest cordless tool line-up powered by an 18V Lithium-Ion slide-style battery. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
8. Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger (Battery Not Included, Power Tool Only)
- RECESSED FORWARD – BACKWARD SWITCH on the back of the head prevents you from accidental actuations in the middle of an important job
- LOW PROFILE HEAD DESIGN allows you to work in an engine bay without issue
- ONBOARD FUEL GAUGE: Lights on the side of the unit will let you know how much power you have left
- LED LIGHTING on the front of the unit allows you to see your job in dimly lit conditions
- REDLINK INTELLIGENCE: A smart chip in this unit allows it to communicate with the M12 battery plugged into it. This prevents it from receiving too much power and overheating, saving it from unnecessary damage
Choose the sub-compact ratchet with best-in-class power, speed and durability. The M12 Cordless 3/8″ Lithium-Ion Ratchet is the ideal tool for auto mechanics, maintenance and repair professionals looking for maximum performance and productivity in a subcompact cordless tool. It utilizes a powerful 12-volt motor to produce up to 35 ft-lbs of torque and 250 RPM, giving users the power and speed of a pneumatic ratchet without the air hose. It is powered by the M12 REDLITHIUM. Battery Pack (sold separately), which delivers more work per charge and more work over pack life than the competitors, as well as best-in-class performance in extreme job site conditions. At just 10-3/4” long and 1.9 lbs, the ratchet is tool-belt portable, and features a 3/4″ low-profile head design for work in the tightest of spaces and engine bays. The variable-speed metal trigger and reinforced steel housing provide maximum control and durability with any application.
9. DEWALT DCK299P2 20V MAX XR 5.0Ah Premium Cordless Hammerdrill & Impact Driver Combo Kit
- HAMMER DRILL: DCD996 Hammer Drill features includes 3-speed levels, high performance (0-2,000 rpm), an all-metal transmission
- IMPACT DRIVER: DCF887 20V MAX* 1/4″ impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute
- HAMMER DRILL: Both units are compact and lightweight to help get into tight spots,DCD996 20V MAX*1/2″ hammerdrill has a compact size (8.4″ front-to-back length) and lightweight (4.7 lb) design to fit tight areas
- INCLUDES: Includes (2) DCB205 20V MAX* XR High Capacity Li-Ion Batteries (5.0 Ah)
- *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
The DEWALT DCK283D2 20V MAX XR 5.0Ah Premium Cordless Hammerdrill & Impact Driver Combo Kit is a combination of the DCD996 20V MAX 1/2 in. hammer drill, with the DCF887 20V MAX 1/4 in. impact driver. The DCD996 Cordless Hammer Drill features includes 3-speed levels, high performance (0-2,000 rpm), an all-metal transmission that optimizes tool-to-task for fast application speeds and improved run-time. This hammer drill offers 0-38,250 BPM for fast drilling in masonry materials. It also has a compact size (8.4 in. front-to-back back length) and lightweight (4.7 lb) design to fit tight areas, and includes 3-Mode LED providing lighting in dark or confined spaces up to 20X brighter than previous model. The DCF887 20V MAX* 1/4 in. Cordless Impact driver provides 1,825 in-lbs of max torque at fast 0-3,250 RPM speed and 0-3,600 impacts per minute. This impact driver also has a compact size (5.3 in. front-to-back length) and lightweight (3.4 lbs.) design. Kit includes: DCD996 20V MAX XR 3-Speed 1/2 in. Hammer drill, DCF887 20V MAX* XR 1/4 in. Impact Driver, (2) DCB205 20V MAX XR High Capacity Li-Ion Batteries (5.0 Ah), Charger, (2) Belt Hooks, 360 degree side handle, Contractor Bag.
10. Milwaukee 2695-24 M18 18V Cordless Power Tool Combo Kit with Hammer Drill, Impact Driver, Reciprocating Saw, and Work Light (2 Batteries, Charger, and Tool Case Included)
- Made in USA and Imported
- 2607-20 HAMMER DRILL / DRIVER: This cordless hammer drill / driver is specially suited for driving holes through softwoods, hardwoods, and masonry. Switch between 3 different drill settings with the top mounted switch and 18 different torque settings with a clutch attached to the keyless chuck
- 2625-20 HACKZALL RECIPROCATING SAW: Use this saw to tear through branches, lumber, PVC pipe, and more. Its Quik Lok blade changing system makes switching between applications a breeze. Reaching overhead spaces is easy with the one handed design and light weight
- 2656-20 1/4 INCH HEX IMPACT DRIVER: Driving lag bolts through porches and thick lumber with pilot holes has never been easier. The variable speed trigger can drive fasteners both large and small, with the onboard LEDs lighting your way for clean work
- 2735-20 WORK LIGHT: With an adjustable head that’s made of sealed aluminum, you can take this outside in varying conditions. A flat standing base lets you keep this shining on your job while you have both hands clear to do the work you need to while seeing it clearly
- 48-11-1828 BATTERIES AND 48-59-1812 CHARGER: 2 extended capacity, 3 amp hour batteries are included in this kit, along with a charger to keep them full. The batteries have an onboard fuel gauge and come loaded with Redlink Intelligence. This lets them communicate with the charger and the tools they power to save power and prevent overheating
For the professional, you want the best tools available. With this Milwaukee 2695-24 combo kit, you will have what you need to perform a huge variety of jobs. Whether you work in construction, the automotive industry, carpentry, maintenance, plumbing, or other major trades, you’ll find some use out of this kit to keep your work running smoothly. For tearing through lumber of varying sizes, use the Hackzall reciprocating saw, which lets you easily grasp it with its single-handed rubber texture handle. For driving different fasteners, you can use the 2607-20 hammer drill or the 2656-20 impact driver. With these, you can drill pilot holes through wood and masonry and drill screws, bolts, and more through it all with precision and ease. If you’re working in the dark, you can keep your workspace lit with the 2735 work light. It can stand on its own, giving you both hands clear to do the work you need to. With a bag to keep them all in, two high capacity batteries, and a charger to keep them fueled to your needs, there are few other kits that will provide as much utility and power as the 2695-24 combination power tool kit from Milwaukee.
From the Manufacturer
The 2695-24 M18 cordless 4-tool combo kit includes the 1/2-Inch Hammer Drill / Driver (2602-20), HACKZALL M18 One- Handed Reciprocating Saw(2625-20), 1/4-Inch Hex Impact Driver (2650-20) and Work Light (49-24-0171). The M18 Cordless System’s patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM the M18 cordless system delivers more torque, more power and longer run-time than the competition.
By our suggestions above, we hope that you can found Black Decker Cordless Srewdriver Sets for you.Please don’t forget to share your experience by comment in this post. Thank you!