Top 9 Adjustable Heating Vent Covers

Introduction
The Home Intuition simple yet extremely useful Heat and Cold Air Deflector is the perfect way to keep your room temperature evenly heated or cooled allowing for better airflow and not getting stuck in the seat that gets hit directly by your vents! This Vent deflector works great for 10″-14″ wide in all locations, floor, wall or ceiling. This deflector is used as an attachment to a central heating and cooling system.

Features
The Air Deflector is super easy to install. Simply place the deflector up against a metallic air vent that supports magnets and adjust the width by sliding back and forth. It is made of heavy duty clear plastic and is held in place with magnets so it’s as easy as can be.

Product Satisfaction
Our combination of high grade material and low cost help deliver a product that’s long lasting and dollar friendly. With our product satisfaction guarantee you can shop at ease knowing that well have your back so what are you waiting for? Pick yours up today.

14″w X 6″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 15.75″w X 7.75″h]

14″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 15.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

12″ X 12″ ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 13.75″w X 13.75″h]

12″w X 12″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 13.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

12″w X 6″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – White [Outer Dimensions: 13.75″w X 7.75″h]

12″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 13.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.

Product Description

This 8-pack of Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.

From the Manufacturer

This Decor Grates 4-Inch by 12-Inch scroll floor register has a brushed nickel finish (2mm metal). Decor Grates floor registers are built with the finest materials. Each and every register goes through a quality assurance process to ensure your satisfaction. Our classic designs will enhance any rooms decor and give you years of trouble free operation. Our family owned company takes great pride in making sure you are totally satisfied with your purchase.

Rocky Mountain Goods 4″ x 10″ Floor Vents 2 Pack comes with two heavy duty floor registers made to fit 4″ by 10″ duct openings. While many floor grills look the same, our floor registers are made with high grade steel for heavy duty use. The premium matte finish is double coated to ensure the color for its lifetime of use. The easy adjust levels allows quick change of flow rate and can even been done with your foot. This floor resister is made to fit a 10 Inch by 4 Inch HVAC hole. The actual floor register outer dimensions are 5.5” by 11.5”. Like all Rocky Mountain Goods products this floor vent comes with a lifetime warranty.

Thermwell #HD5 10-14″ Adjustable Heat Deflector

12″w X 8″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Duct Cover Sidewall or Cieling – Grille Register – High Airflow – White
12″w X 8″h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 13.875″ Width X 10″ Height – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Powder-Coat Finish – Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “hole” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″ at the width, and + 2″ at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″ wide by 14″ tall, order a 20×14. If your hole is 14″ wide by 20″ tall, order a 14×20.

16″w x 6″h ADJUSTABLE AIR SUPPLY DIFFUSER – HVAC Vent Cover Sidewall or Ceiling – Grille Register – High Airflow – Black [Outer Dimensions: 17.75″w X 7.75″h]

16″w X 6″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 17.75″w X 7.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE

You may think of grilles and registers as a generic component of the ventilation system in your house.
But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that you can point out to your family members and house guests.
Some of our best features aren’t readily apparent, but you’ll appreciate the benefits over a long period of time.
This grille has a high standard of design, production and finish on all products.

Every part is hand inspected for quality before it is packaged, no exceptions.
Quality Packaging – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the “”hole”” in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +1.875″” at the width, and + 2″” at the height.

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20″” wide by 14″” tall, order a 20×14. If your hole is 14″” wide by 20″” tall, order a 14×20.

100% Satisfaction Guaranteed

Don’t worry, you’re covered by our 100% moneyback guarantee no questions asked. Click Add to Cart Now! and enjoy a new updated refreshing look to your home.