Nowadays, there are so many products of cooling fan pc 6000rpm in the market and you are wondering to choose a best one.You have searched for cooling fan pc 6000rpm in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cooling fan pc 6000rpm which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
661 reviews analysed
1. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
2. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
Feature
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
Description
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Notice!!!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
3. MASSCOOL 90mm Cooling Fan FD09025B1M3/4
Feature
- MASSCOOL FD09025B1M3/4 90mm Case Fan, Compatibility: Case Fan, Size: 90mm.
- Bearing Type: Ball, RPM :240010% RPM, Air Flow: 45.18 cfm at 2400 RPM, Noise Level:34dBA, Power Connector: 3 / 4 pin, Color: Black.
- Physical Spec: Dimensions: 90 x 90 x 25mm, Manufacturer Warranty: Parts and Labor : 1 year limited .
- Bearing Type: Ball Bearing
- Fan speed: 2,400 RPM +/-10%
- Fan Noise level: 34.0 dBA
- Max. Fan Air Flow: 45.18 CFM
- Rated Power: 2.16 W
- Power Connector: 3-pin motherboard
- 4-pin power supply
Description
MASSCOOL FD09025B1M3/4 90mm Cooling Fan
4. ANTEC Cooling Fan PRO 92MM DBB
Description
Antec PRO 92mm Double Ball-Bearing Case Fan. Heat is the #1 cause of hardware failure. Adding Antec Case Fans can improve system stability and longevity by providing additional cooling and improved airflow.
5. Noctua NF-A9 FLX, Premium Quiet Fan, 3-Pin (92mm, Brown)
Feature
- Premium quiet fan, 92x92x25 mm, 12V, 3-pin Molex, 1600/1250/1050 RPM, max. 17.1 dB(A), >
- 150,000 h MTTF
- Award-winning 92x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- Ideal for 9cm CPU coolers (e.g. Noctua NH-U9(S) & NH-D9L series), compact PC cases (HTPC, ITX, Small Form Factor), replacement fan for NAS and other devices, etc.
- 3-pin FLX version provides 1600/1250/1050rpm speed settings via Low-Noise Adaptors to fine-tune the fan for maximum airflow or near-silent operation
- Includes anti-vibration mounts, fan screws, Low-Noise & Ultra-Low-Noise Adaptors, extension cable and 3:4-pin adaptor for powering the fan directly from the power supply
6. Raspberry Pi Fan, AiTrip Raspberry Pi Cooling Fan 30x30x7mm Brushless CPU Cooling Fan for Raspberry Pi 3 B+, Pi 3, Pi 2, Pi 1 B+, RetroFlag NESPI Case (2pcs Raspberry Pi Fan)
Feature
- Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not necessarily using them for Raspberry Pi but rather for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5m³ / h
- Number of revolutions: 13200RPM.
- Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- The fan not only support Raspberry Pi 2 and Pi3 but compatible with other DIY project.
Description
Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B / Raspberry Pi 3 B+
Bearing Type: Sleeve
Size (L x W x H): 3 x 3 x 0.7 cm
Connector: 2 pin
Rated Voltage: DC 3.0-5.8V
Current: 0.1A
Speed: 6000RPM±10%
Airflow: 5m³/h
Noise Level: 18dba±10%
Wire Length: 60 mm
Color: Black
Package Includes:
2x iUniker Cooling Fan
2x Screw Sets
7. TOTOT 4PCS Cooling Blower Fan 5015 12V 0.18A 6000Rpm DC Industrial Cooling Turbo Fan 50x50x15mm 3D Printer Parts Mini Black Plastic Fans
Feature
- Type: 12V Cooling Blower Fan,Suitable for self-control equipment, chassis cabinet, electric welder, computer, etc
- Size: 50x50x15mm/1.97×1.97×0.59inch Voltage: 12V Speed: 6000RPM
- Feature: High quality, stable performance, strong power, low noise, long service time.
- It is safe, friendly,harmless to environment. The original material is of good quality, we have strict quality control system.
- Excellent for cooling heatsinks on hot ends, prints, or other cooling needs. Widely used in Printers, humidifiers, heaters, clothes dryers, etc.
Description
Feature:
Model: 5015
Voltage: 12V
Power: 2.16W
Current: 0.18A
Noise: 25dBA
Airflow: 18CFM
Speed: 6000Rpm
Bearings: Oil-bearing
Air inlet size: 31mm
Outlet size: 12.4 x 16.8mm
Dimensions: 50 x 50 x 15mm / 1.97 x 1.97 x 0.59 inch
Color: Black
Feature: Excellent for cooling heatsinks on hot ends, prints, or other cooling needs. Bearing is high precision, long life and low noise.
Package includes:
4 x Cooling Blower Fan
8. Noctua NF-A9 PWM, 4-Pin Premium Cooling Fan (92mm, Brown)
Feature
- The NF-A9 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Air flow – 46.4 CFM. Noise level – 22.8 decibels
- Noctua’s AAO (Advanced Acoustic Optimization) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency
- Noctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity
- Integrated Anti-Vibration Pads made from extra-soft silicone minimize the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems
- The NF-A9 features the further optimized second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilization, precision and durability
- Supporting fully automatic PWM speed control, the NF-A9 PWM uses Noctua’s novel, custom designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds
- The NF-A9 PWM is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 2000 to 1550rpm. The L.N.A can be used either to run the fan at a fixed speed of 1550rpm or to cap the maximum speed when using automatic PWM control
- The fan’s short 20cm primary cable minimizes cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary
9. Noctua NF-A9x14 PWM, Premium Quiet Fan, 4-Pin (92x14mm, Brown)
Feature
- Premium quiet fan, 92x92x14 mm, 12V, 4-pin PWM, max. 2200 RPM, max. 19.9 dB(A), >
- 150,000 h MTTF
- Award-winning 92x14mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior quiet cooling performance
- 14mm slim design is ideal for low-profile 9cm CPU coolers (e.g. Noctua NH-L9 series), compact PC cases and other space-restricted applications
- 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 500-2200rpm speed range (1700rpm max. with supplied Low-Noise Adaptor)
- Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header
10. Cooler Master Sleeve Bearing 120mm Silent Fan for Computer Cases, CPU Coolers, and Radiators (Value 4-Pack)
Feature
- Higher air flow to enhance cooling performance
- Ultra silent operation at 19 dBA
- Economic solution for perfect performance
- RoHS compliance for protecting the environment
- 4 IN 1 Value Pack
- Higher air flow to enhance cooling performance
- Ultra silent operation at 19 dBA
- Economic solution for perfect performance
- RoHS compliance for protecting the environment
Description
Shipping Height: 4.2 Shipping Width: 5.0 Master Pack Qty: 15 General Information Manufacturer: Cooler Master Co., Ltd Manufacturer Part Number: R4-S2S-124K-GP Brand Name: Cooler Master Product Name: Silent Fan 120mm Product Type: Cooling Fan Fan Information Number of Fans: 1 Fan Bearing Type: Sleeve Bearing Fan Speed: 1 x 1200 rpm Heatsink Information Fins/Pins Style: Straight Fin Cooler Type: Thermoelectric Interfaces/Ports Connectors: 3-pin TX3 Physical Characteristics Fan Diameter: 1 x 120 mm Height: 4.7 Width: 4.7 Depth: 1.0 Weight (Approximate): 4.23 oz Miscellaneous Compatibility: Computer Case Application/Usage: Case
Conclusion
By our suggestions above, we hope that you can found Cooling Fan Pc 6000Rpm for you.Please don’t forget to share your experience by comment in this post. Thank you!